SPLITTER PRO 1X3 SPDIF/TOSLINK SUPPORTO AUDIO 5.1
30,33 €
Tasse incluse
SPLITTER PRO 1X3 SPDIF/TOSLINK SUPPORTO AUDIO 5.1
-
Politiche per la sicurezza (modificale con il modulo Rassicurazioni cliente)
-
Politiche per le spedizioni (modificale con il Modulo rassicurazioni cliente)
-
Politiche per i resi merce (modificale con il Modulo rassicurazioni cliente)
SPLITTER PROFESSIONALE 1X3 SPDIF/TOSLINK SUPPORTO AUDIO 5.1
SPDIF TOSLINK Digital Optical Audio Splitter 1x3 1 Input 3 Output 3 Port
Questo SPDIF / TOSLINK Digital Audio Optical splitter consente di distribuire UN ingresso audio ottico digitale a tre amplificatori o ricevitori, senza problemi senza degradazione di segnale. Supporta i formati audio LPCM2.0, DTS e Dolby-AC3.
Introduction
This SPDIF/TOSLINK Digital Optical Audio splitter allows you to distribute input digital optical audio to three amplifiers or receivers, seamlessly and flawlessly without degradation.
It supports LPCM2.0, DTS and Dolby-AC3 audio formats.
Features
One ways of optical fiber signal input splitter to three sets of SPDIF/TosLink signal receiving device.
Audio format support : LPCM2.0/DTS/Dolby-AC3
Support signal retiming
Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m.
Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine
No loss of quality
Installs in minutes
Need DC5V/500mA power supply
Specification:
Support audio format:LPCM2.0/DTS/Dolby-AC3
Peak wave length:650nm
Max baud rate:16Mbps
Output cable distance:=40m(Use the optical fiber cable loss less the 0.2Db/m )
Max working current:100mA
Power adapter format:Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/500mA
Operating Temperature range:(0 to +40°C)
Operating Humidity range:5 to 90%RH (No Condensation)
SPDIF TOSLINK Digital Optical Audio Splitter 1x3 1 Input 3 Output 3 Port
Questo SPDIF / TOSLINK Digital Audio Optical splitter consente di distribuire UN ingresso audio ottico digitale a tre amplificatori o ricevitori, senza problemi senza degradazione di segnale. Supporta i formati audio LPCM2.0, DTS e Dolby-AC3.
Introduction
This SPDIF/TOSLINK Digital Optical Audio splitter allows you to distribute input digital optical audio to three amplifiers or receivers, seamlessly and flawlessly without degradation.
It supports LPCM2.0, DTS and Dolby-AC3 audio formats.
Features
One ways of optical fiber signal input splitter to three sets of SPDIF/TosLink signal receiving device.
Audio format support : LPCM2.0/DTS/Dolby-AC3
Support signal retiming
Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m.
Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine
No loss of quality
Installs in minutes
Need DC5V/500mA power supply
Specification:
Support audio format:LPCM2.0/DTS/Dolby-AC3
Peak wave length:650nm
Max baud rate:16Mbps
Output cable distance:=40m(Use the optical fiber cable loss less the 0.2Db/m )
Max working current:100mA
Power adapter format:Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/500mA
Operating Temperature range:(0 to +40°C)
Operating Humidity range:5 to 90%RH (No Condensation)
SPLITTER PRO 1X3 SPDIF/TOSLINK SUPPORTO AUDIO 5.1